- 1 tree branch, the diameter of which should be about the size you’d like to make your buttons
- A coping saw
- 1 clamp
- A power drill
- Some scrap wood
- A paint brush
- Rusty nails or pennies
- Shellac (Matt used Zinsser’s Bullseye Shellac)
- A shirt and some thread!
1) Place your tree branch on a work surface and clamp it so that part of it comes out over your surface’s edge.
2) Using your coping saw, cut a thin slice from your branch.
3) With a power drill with a small drill attachment, drill two holes into your branch slice. Be sure to place some scrap wood underneath while you drill, to avoid putting holes into your work surface!
4) Rub your button against some sand paper to smooth out its surface.
5) If you desire, brush on a coat of wood stain, followed by a coat of shellac. The shellac will seal the wood, allowing it to survive multiple machine washes.
Above: Matt created natural wood stains by soaking pieces of scrap metal (from pennies to rusty nails) in jars filled with vinegar. The vinegar and metal chemically react to create a beautiful, natural wood stain that can be brushed on. As you can see, different metals create different colored stains. While pennies create a warmer tone, rusty nails create a more somber, gray look. Experiment with different metals to see what you like best!
6) Allow your buttons to fully dry and then sew them onto your clothes! Presto! Beautiful, handmade buttons for fall!